HD30206 RF Amplifier
System
HD30206
| FREQUENCY RANGE20–500 MHz | OUTPUT POWER600 W minimum / 800 W typical Psat |
| GAIN58 dB minimum | SUPPLY VOLTAGE180 – 240 VAC, 50 – 60Hz |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD30206 electrical specifications
Source: HD30206(20 – 500MHz, 600W, 58dB) V1.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 20 – 500 MHz | |
| Power Output @ Psat | 600 W minimum / 800 W typical | CW |
| Power Output @ P1 dB | 500 W typical | |
| Power Gain | 58 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 48 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonic |
| Operating Voltage | 180 – 240 VAC, 50 – 60Hz | |
| Power Consumption | 3000 W maximum | At rated output |
HD30206 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 220 × 670 mm | 5U, excluding connectors |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD30206 documentation
Download HD30206(20 – 500MHz, 600W, 58dB) V1.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD30206
HD30206 is listed for 20–500 MHz operation.
Output: 600 W minimum / 800 W typical Psat. Gain: 58 dB minimum. P1dB: 500 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180 – 240 VAC, 50 – 60Hz. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 220 × 670 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.