HD35133 RF Amplifier
System
HD35133
| FREQUENCY RANGE80–1,000 MHz | OUTPUT POWER300 W minimum / >400 W typical Psat |
| GAIN55 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35133 electrical specifications
Source: HD35133 V1.4.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 80 – 1000 MHz | |
| Power Output @ Psat | 300 W minimum / >400 W typical | CW or Pulse |
| Power Gain | 55 dB minimum | 0 dBm or less for rated Pout |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 45 dBm/Tone, A = 1 MHz |
| Harmonics | <-20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47 – 63 Hz |
HD35133 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50°C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 482 × 177 × 700 mm | 4u, without handles |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35133 documentation
Download HD35133 V1.4.pdf for the complete specifications, test conditions, drawings and available options.
About HD35133
HD35133 is listed for 80–1,000 MHz operation.
Output: 300 W minimum / >400 W typical Psat. Gain: 55 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 482 × 177 × 700 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.