HD35136 RF Amplifier
System
HD35136
| FREQUENCY RANGE500–1,000 MHz | OUTPUT POWER200 W (catalog) |
| GAIN53 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35136 electrical specifications
Source: HD35136(0.5 – 1GHz, 200W, 53dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 500 – 1000 MHz | |
| Power Output | 200 W minimum | CW |
| Power Output @ P1 dB GCP | 150 W typical | |
| Power Gain | 53 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | -20 dBc typical | 43 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 50 – 60Hz |
| Power Consumption | 1000 W maximum | At rated output |
HD35136 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | Front or rear panel |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50°C | |
| Relative Humidity | 5to95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 131 × 600 mm | 3U, excluding handles |
| RF Connectors In/Out | Type-N Female | Front or rear panel |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35136 documentation
Download HD35136(0.5 – 1GHz, 200W, 53dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35136
HD35136 is listed for 500–1,000 MHz operation.
Output: 200 W (catalog). Gain: 53 dB minimum. P1dB: 150 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 131 × 600 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.