HD33515 RF Amplifier
System
HD33515
| FREQUENCY RANGE120–610 MHz | OUTPUT POWER1,000 W (catalog) |
| GAIN60 dB minimum | SUPPLY VOLTAGE180 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD33515 electrical specifications
Source: HD33515 (0.12 – 0.61GHz, 1000W, 60dB) V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
Frequency clarification: This page follows the matching PDF (120–610 MHz). The product matrix lists 30–520 MHz. Confirm the required frequency range when requesting a quote.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 120 – 610 MHz | |
| Power Output @ Pulse | 1000 W minimum | Peak Pulse |
| Power Gain | 60 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3 dB p-p | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input Return Loss | -10 dB maximum | |
| Output Power On/Off Ratio | 80 dB maximum | TTL Gate Control |
| Harmonics | -20 dBc typical | At rated output |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 180 – 240 VAC | 50 – 60Hz |
| Power Consumption | 2 kW Avg maximum | At rated output |
HD33515 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Blanking Connectors | BNC (F) |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50°C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 131 × 630 mm | 3U, excluding handles |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Blanking Connectors | BNC (F) | |
| AC Power | IEC 60320-C14 or L620P (M) | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD33515 documentation
Download HD33515 (0.12 – 0.61GHz, 1000W, 60dB) V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD33515
HD33515 is listed for 120–610 MHz operation.
Output: 1,000 W (catalog). Gain: 60 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 131 × 630 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.