HD31183 RF Amplifier
System
HD31183
| FREQUENCY RANGE500–2,500 MHz | OUTPUT POWER200 W minimum Psat |
| GAIN53 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD31183 electrical specifications
Source: HD31183 (0.5 – 2.5GHz, 200W, 53dB) V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 500 – 2500 MHz minimum | |
| Power Output @ Psat | 200 W minimum | CW |
| Power Gain | 53 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | 10 dB minimum | Relative to 50 Ohm |
| 3rd Order Intercept | +58 dBm typical | |
| Harmonics | 20 dBc typical | At rated output power |
| Non-Harmonics Spurious | 60 dBc minimum | |
| Operating Voltage | 100 – 240 VAC | |
| AC Power Consumption | 1500 W maximum | At rated output |
| maximum Input Power | +8 dBm maximum] |
HD31183 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | |
| Pulse Blanking / Safety Interlock | BNC Female | |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31183 documentation
Download HD31183 (0.5 – 2.5GHz, 200W, 53dB) V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD31183
HD31183 is listed for 500–2,500 MHz operation.
Output: 200 W minimum Psat. Gain: 53 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.