HD35153 RF Amplifier
System
HD35153
| FREQUENCY RANGE500–2,000 MHz | OUTPUT POWER200 P1 dB (catalog) |
| GAIN54 dB minimum | SUPPLY VOLTAGE180 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35153 electrical specifications
Source: HD35153 (0.5 – 2GHz, 300W, 52dB) V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 0.5 – 2.0 GHz | |
| Power Output @ Saturation | 300 W typical | CW |
| Power Output @ P1 dB | 200 W minimum | |
| Power Gain | 54 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 44 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Operating Voltage | 180 – 240 VAC | 50 – 60Hz |
| Power Consumption | 1500 W maximum | At rated Pout |
HD35153 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | Front or rear panel |
| AC Power / Interface | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5to95% | Non Condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 220 × 600 mm | 5U, excluding handles |
| RF Connectors In/Out | Type-N Female | Front or rear panel |
| AC Power / Interface | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35153 documentation
Download HD35153 (0.5 – 2GHz, 300W, 52dB) V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35153
HD35153 is listed for 500–2,000 MHz operation.
Output: 200 P1 dB (catalog). Gain: 54 dB minimum. P1dB: 200 W minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 220 × 600 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.