HD33563 RF Amplifier
System
HD33563
| FREQUENCY RANGE2,000–8,000 MHz | OUTPUT POWER200 W minimum Psat |
| GAIN53 dB minimum | SUPPLY VOLTAGE180 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYBroadband Amplifier System |
HD33563 electrical specifications
Source: HD33563 (2 – 8GHz, 200W, 53dB) V1.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 2.0 – 8.0 GHz | |
| Power Output @ Psat | 200 W minimum | CW or Pulse |
| Power Output @ P1 dB | 100 W minimum | |
| Power Gain | 53 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 5 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 43 dBm/Tone, A = 1 MHz |
| Harmonics | <-20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 180 – 240 VAC | 47-63 Hz |
| Power Consumption | 2500 W maximum | At rated output |
HD33563 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95% | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 221 × 560 mm | 5U, excluding handles |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD33563 documentation
Download HD33563 (2 – 8GHz, 200W, 53dB) V1.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD33563
HD33563 is listed for 2,000–8,000 MHz operation.
Output: 200 W minimum Psat. Gain: 53 dB minimum. P1dB: 100 W minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 221 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.