HD31122 RF Amplifier
System
HD31122
| FREQUENCY RANGE1,000–20,000 MHz | OUTPUT POWER3 W minimum / 4 W typical Psat |
| GAIN36 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYUltra High Frequency amplifier System |
HD31122 electrical specifications
Source: HD31122 (1 – 20GHz, 3W, 36dB) V0.5.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1.0 – 20.0 GHz | |
| Power Output @ Psat | 3 W minimum / 4 W typical | CW |
| Power Gain | 36 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4.0 dB p-p maximum | Constant input power |
| Input Return Loss | 10 dB minimum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 26 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Operating Voltage | 100 – 240 VAC | 47 – 63 Hz |
| Power Consumption | 50 W maximum | At rated output |
HD31122 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-SMA Female | Front or rear panel |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95% | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x Hx D (Benchtop) | 210 × 100 × 300 mm 242 × 110 × 384 mm | Excluding brackets Including brackets |
| RF Connectors In/Out | Type-SMA Female | Front or rear panel |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31122 documentation
Download HD31122 (1 – 20GHz, 3W, 36dB) V0.5.pdf for the complete specifications, test conditions, drawings and available options.
About HD31122
HD31122 is listed for 1,000–20,000 MHz operation.
Output: 3 W minimum / 4 W typical Psat. Gain: 36 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 210 × 100 × 300 mm 242 × 110 × 384 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.