HD32178 RF Amplifier
System
HD32178
| FREQUENCY RANGE2,000–4,000 MHz | OUTPUT POWER100 W minimum Psat |
| GAIN50 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYUltra High Frequency amplifier System |
HD32178 electrical specifications
Source: HD32178 (2 – 4GHz, 100W, 50dB) V0.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 2.0 – 4.0 GHz | |
| Power Output @ Psat | 100 W minimum | CW |
| Power Gain | 50 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 40 dBm/Tone, A = 1 MHz |
| Harmonics | <-20dBc typical | |
| Non-Harmonics Spurious | -60 dBc maximum | Non-harmonic |
| Operating Voltage | 100 – 240 VAC | |
| Power Consumption | 600 W maximum | At rated output |
HD32178 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 133 × 560 mm | 3U, excluding handles |
| RF Conn. In / Out / Sample | N-Female | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32178 documentation
Download HD32178 (2 – 4GHz, 100W, 50dB) V0.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD32178
HD32178 is listed for 2,000–4,000 MHz operation.
Output: 100 W minimum Psat. Gain: 50 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 133 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.