HD32063 RF Amplifier
System
HD32063
| FREQUENCY RANGE800–3,200 MHz | OUTPUT POWER500 CW, 1 kW Pulse (catalog) |
| GAIN60 dB minimum | SUPPLY VOLTAGE200 – 240 VAC, 50-60Hz |
| CONFIGURATIONSystem | CATEGORYPulse Amplifier System |
HD32063 electrical specifications
Source: HD32063 (0.8 – 3.2GHz, 500W, 60dB) V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 0.8 – 3.2 GHz | |
| Power Output @ Peak Pulse | 1000 W typical | Pulse |
| Power Output CW | 500 W minimum | CW |
| Power Gain | 60 dB minimum | 0 dBm or less for rated Pout |
| Gain Adjustment Range | 20 dB minimum | Local or Remote |
| Power Gain Flatness | 4 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 47 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Output Power On/Off Ratio | -80 dB typical | TTL Gate Control |
| Operating Voltage | 200 – 240 VAC, 50-60Hz | Opt: 120/208 VAC, 3-Ph |
| Power Consumption CW / Pulse | 5500 / 2500 W maximum | At rated Pout |
HD32063 control and monitoring
Use the matching datasheet to confirm available control and monitoring interfaces for the ordered configuration.
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
Confirm enclosure dimensions, RF connectors, mounting and cooling requirements in the matching datasheet.
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32063 documentation
Download HD32063 (0.8 – 3.2GHz, 500W, 60dB) V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD32063
HD32063 is listed for 800–3,200 MHz operation.
Output: 500 CW, 1 kW Pulse (catalog). Gain: 60 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 200 – 240 VAC, 50-60Hz. Confirm cooling and installation requirements in the datasheet.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.
Request a quote for HD32063
Source-checked power ratings
500 W minimum CW / 1,000 W typical peak pulse
25°C, 50 ohms. Pulse: width up to 560 µs, duty up to 10%, PRF up to 10 kHz. See source footnotes.
Datasheet V1.2 — page 1