HD35190 RF Amplifier
System
HD35190
| FREQUENCY RANGE0.01–400 MHz | OUTPUT POWER150 W minimum Psat |
| GAIN52 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD35190 electrical specifications
Source: HD35190 (0.01 – 400MHz, 150W, 52dB) V0.4.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Band | A | B | Band switching @ 15 mS typical |
| Operating Frequency Range | 10 KHz – 20 MHz | 20 – 400 MHz | |
| Power Output @ Psat | 150 W minimum | CW |
| Power Output @ P1 dB | 100 W minimum / 125 Wat typical | |
| Power Gain | 52 dB minimum | 0 dBm or less for Rated Power |
| Power Gain Flatness | 4.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 42 dBm/Tone, A = 1 MHz |
| Harmonics | <-20 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | |
| Power Consumption | 1200 W maximum | At rated Pout |
HD35190 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 5000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x Hx D | 483 × 221 × 560 mm | 5U, excluding handles |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35190 documentation
Download HD35190 (0.01 – 400MHz, 150W, 52dB) V0.4.pdf for the complete specifications, test conditions, drawings and available options.
About HD35190
HD35190 is listed for 0.01–400 MHz operation.
Output: 150 W minimum Psat. Gain: 52 dB minimum. P1dB: 100 W minimum / 125 Wat typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 483 × 221 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.