HD35211 RF Amplifier
Module
HD35211
| FREQUENCY RANGE8,000–12,000 MHz | OUTPUT POWER100 W minimum / 120 W typical Psat |
| GAIN50 dB minimum | SUPPLY VOLTAGE32 VDC Nom |
| CONFIGURATIONModule | CATEGORYUltra High Frequency amplifier Module |
HD35211 electrical specifications
Source: HD35211 V1.0.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 8.0 – 12.0 GHz | |
| Power Output @ Psat | 100 W minimum / 120 W typical | CW |
| Power Gain | 50 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| Harmonics | -25 dBc maximum | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Noise Figure | 10 dB maximum | |
| Operating Voltage | 32 VDC Nom | |
| Current Consumption | 23 A maximum / <20 A typical | At rated Pout |
HD35211 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | Not Used | N/A |
| 2 | Not Used | N/A |
| Al | VDD | 32 VDC |
| A2 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 45000 feet! |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 180 × 200 × 27 mm | Excluding connectors |
| RF Connectors In/Out | SMA female / Type-N female | |
| DC Power / Interface Connector | 7-Pin Hybrid D-Sub | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35211 documentation
Download HD35211 V1.0.pdf for the complete specifications, test conditions, drawings and available options.
About HD35211
HD35211 is listed for 8,000–12,000 MHz operation.
Output: 100 W minimum / 120 W typical Psat. Gain: 50 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 32 VDC Nom. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 180 × 200 × 27 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.