HD35229 RF Amplifier
System
HD35229
| FREQUENCY RANGE18,000–26,500 MHz | OUTPUT POWER150 W minimum / 200 W typical Psat |
| GAIN52 dB minimum | SUPPLY VOLTAGE120/208 VAC, 3-Ph, 47 – 63 Hz |
| CONFIGURATIONSystem | CATEGORYMillimeter Amplifier System |
HD35229 electrical specifications
Source: HD35229 (18 – 26.5GHz, 150W, 52dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 18.0 – 26.5 GHz | |
| Power Output @ Psat | 150 W minimum / 200 W typical | CW or Pulse |
| Power Gain | 52 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4.0 dB p-p typical | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 42 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc maximum | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 120/208 VAC, 3-Ph, 47 – 63 Hz | Opt: 230/400 VAC, 3-Ph |
| Power Consumption | 4000 W maximum | At rated output |
HD35229 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x Hx D | 421 × 353 × 850 mm | 8U, excluding connectors |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | MS Style | Or equivalent |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35229 documentation
Download HD35229 (18 – 26.5GHz, 150W, 52dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35229
HD35229 is listed for 18,000–26,500 MHz operation.
Output: 150 W minimum / 200 W typical Psat. Gain: 52 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 120/208 VAC, 3-Ph, 47 – 63 Hz. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 353 × 850 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.