MILLIMETER AMPLIFIER SYSTEM

HD33544 RF Amplifier
System

26,500–40,000 MHz · 40 W (catalog) output · 46 dB minimum gain
HD33544 RF amplifier system product photo
SYSTEM

HD33544

HD33544 is an RF amplifier system covering 26,500–40,000 MHz, listed in the Millimeter Amplifier System product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE26,500–40,000 MHzOUTPUT POWER40 W (catalog)
GAIN46 dB minimumSUPPLY VOLTAGE100 – 240 VAC
CONFIGURATIONSystemCATEGORYMillimeter Amplifier System
Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD33544 electrical specifications

Source: HD33544 (26.5 – 40GHz, 40W, 46dB) V1.8.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating Frequency Range26.5 – 40.0 GHz
Power Gain46 dB minimum0 dBm or less for rated Pout
Power Gain Flatness4.0 dB p-p maximumConstant input power
Gain Adjustment Range20 dB minimumLocal or remote
Input Return Loss-10 dB maximum
2-Tone Intermodulation (IMD)-30 dBc typical36 dBm/Tone, A = 1 MHz
Noise Figure10 dB typical
Harmonics-20 dBc maximumAt rated output power
Spurious-60 dBc maximumNon-harmonics
Operating Voltage100 – 240 VAC47-63 Hz
Power Consumption2000 W maximumAt rated output
CONTROL & MONITORING

HD33544 control and monitoring

ParameterSpecificationConditions / notes
RF Connectors In / Out / Sample Port2.9 mm KF / WR28 / 2.9 mm KFFront or rear panel
Interface Connector9-Pin D-SubRear panel

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Operating Ambient Temperature0 to +50 °C
Storage Temperature-40 to +85 °C
Relative Humidityup to 95%Non-Condensing
Altitude3000 meters
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions W x H x D430 × 133 × 750 mm3U, excluding handles
RF Connectors In / Out / Sample Port2.9 mm KF / WR28 / 2.9 mm KFFront or rear panel
Interface Connector9-Pin D-SubRear panel
AC PowerIEC 60320-C14Or equivalent
Cooling: Built in Quiet-CoolClosed-circuit air-liquid cooling

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD33544 documentation

Download HD33544 (26.5 – 40GHz, 40W, 46dB) V1.8.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD33544

HD33544 is listed for 26,500–40,000 MHz operation.

Output: 40 W (catalog). Gain: 46 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 100 – 240 VAC. Cooling: Closed-circuit air-liquid cooling.

Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.

Dimensions: 430 × 133 × 750 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD33544

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy