HD35246 RF Amplifier
System
HD35246
| FREQUENCY RANGE10,000–13,000 MHz | OUTPUT POWER400 W minimum Psat |
| GAIN56 dB minimum | SUPPLY VOLTAGE120/208 VAC, 3-Ph, 47 – 63 Hz |
| CONFIGURATIONSystem | CATEGORYUltra High Frequency amplifier System |
HD35246 electrical specifications
Source: HD35246 (10 – 13GHz, 400W, 56dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 10.0 – 13.0 GHz | |
| Power Output @ Psat | 400 W minimum | CW or Pulse |
| Power Gain | 56 dB minimum | 0 dBm or less for Rated Power |
| Power Gain Flatness | 2 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 46 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc maximum | At rated output |
| Spurious | -60 dBc maximum | Non-harmonic |
| Operating Voltage | 120/208 VAC, 3-Ph, 47 – 63 Hz | Opt: 230/400 VAC, 3-Ph |
| Power Consumption | 6000 W maximum | At rated output |
HD35246 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95% | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | MS3102E22-22P | Or equivalent |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling | Air-cooled |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35246 documentation
Download HD35246 (10 – 13GHz, 400W, 56dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD35246
HD35246 is listed for 10,000–13,000 MHz operation.
Output: 400 W minimum Psat. Gain: 56 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 120/208 VAC, 3-Ph, 47 – 63 Hz. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.