HD33905 RF Amplifier
Module
HD33905
| FREQUENCY RANGE3,600–3,600 MHz | OUTPUT POWER1,300 W (catalog) |
| GAIN62 dB Nom | SUPPLY VOLTAGE50 V (catalog) |
| CONFIGURATIONModule | CATEGORYLow Frequency Module |
HD33905 electrical specifications
Source: HD33905 V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 3.6 GHz | |
| Power Output @ Pulse | 1300 W typical | |
| Power Gain | 62 dB Nom | |
| Input / Output Return Loss | -10 dB maximum | Relative to 50 Ohm |
| Harmonics | -40 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
HD33905 control and monitoring
| Pin | Function | Description |
|---|---|---|
| Pl | GND | Ground |
| Al | VDD | +50 VDC |
| A2 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 95 % maximum | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 14.37 × 9.84 × 1.69in (365 × 250 × 43 mm) | |
| RF Connectors In/Out | SMA Female / Type-N Female | |
| DC Power / Interface Connector | 7-Pin Hybrid D-Sub | 7W2 |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD33905 documentation
Download HD33905 V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD33905
HD33905 is listed for 3,600–3,600 MHz operation.
Output: 1,300 W (catalog). Gain: 62 dB Nom. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 50 V (catalog). Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 14.37 × 9.84 × 1.69in (365 × 250 × 43 mm). Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.