HD35269 RF Amplifier
Module
100–1,500 MHz · 20 dBm minimum P1 dB (0.1 W) output · 40 dB typical gain
HD35269
| FREQUENCY RANGE100–1,500 MHz | OUTPUT POWER20 dBm minimum P1 dB (0.1 W) |
| GAIN40 dB typical | SUPPLY VOLTAGE20 VDC Nom |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier Module |
Source: HD35269 V0.3. Output P1 dB is 20 dBm minimum (0.1 W), and linear gain is 40 dB typical with Pin = 0 dBm maximum. Electrical specifications are stated at 50 Ω and 25°C. Review the complete datasheet for conditions and options.
HD35269 electrical specifications
Source: HD35269 V0.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 100 – 1500 MHz | |
| Power Output @ P1 dB | 20 dBm minimum | |
| Harmonics | -20 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Input / Output Return Loss | -10 dB maximum | |
| Noise Figure | 2.0 dB Nom | |
| Operating Voltage | 20 VDC Nom | 15 VDC Available |
| Linear Gain | 40 dB typical | Pin = 0 dBm maximum |
| Gain Flatness | ±1.5 dB | See datasheet conditions |
HD35269 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | VDD | 20 VDC (15 VDC Optional) |
| 2 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -10 to +55 °C | |
| Relative Humidity | up to 95% | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 44.7 × 29.5 × 17 mm | |
| RF Connectors In/Out | SMA-Female | |
| DC Power / Interface Connector | Feed-Thru | |
| Ground | Solder Lug |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35269 documentation
Download HD35269 V0.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD35269
HD35269 is listed for 100–1,500 MHz operation.
The HD35269 V0.3 datasheet specifies 20 dBm minimum output at P1 dB, equivalent to 0.1 W, and 40 dB typical linear gain with Pin = 0 dBm maximum. Electrical specifications are stated at 50 Ω and 25°C. Preserve these rating definitions and test conditions when comparing models.
Supply: 20 VDC Nom. Confirm cooling and installation requirements in the datasheet.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 44.7 × 29.5 × 17 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.