HD35284 RF Amplifier
Module
HD35284
| FREQUENCY RANGE10–18,000 MHz | OUTPUT POWER20 dBm (catalog) |
| GAIN30 dB typical | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONModule | CATEGORYLow Noise Amplifier System |
HD35284 electrical specifications
Source: HD35284 V0.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 10 MHz- 18.0 GHz | |
| Power Output @ P1 dB | 20 dBm minimum | CW or Pulse |
| Linear Gain | 30 dB typical | 0 dBm or less for rated Pout |
| Input Return Loss | -10 dB maximum | |
| Noise Figure | 10 dB maximum / 6 dB typical | |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 50 W maximum | At rated output |
HD35284 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | N Female or SMA Female | Front panel standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +70 °C | |
| Relative Humidity | up to 95% | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 210 × 100 × 300 mm | Excluding brackets |
| Dimensions W x H x D (Benchtop) | 242 × 110 × 384 mm | Including brackets |
| RF Connectors In/Out | N Female or SMA Female | Front panel standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD35284 documentation
Download HD35284 V0.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD35284
HD35284 is listed for 10–18,000 MHz operation.
Output: 20 dBm (catalog). Gain: 30 dB typical. P1dB: 20 dBm minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 210 × 100 × 300 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.