BROADBAND AMPLIFIER MODULE

HD30174 RF Amplifier
Module

Name: HD30174 1,000–6,000 MHz RF Amplifier Module
Brand: HD Communications
SKU: HD30174

1,000–6,000 MHz · 20 W minimum / >30 W typical Psat output · 43 dB minimum gain

MODULE

HD30174

HD30174 is an RF amplifier module covering 1,000–6,000 MHz, listed in the Broadband Amplifier Module product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.

FREQUENCY RANGE1,000–6,000 MHz	OUTPUT POWER20 W minimum / >30 W typical Psat
GAIN43 dB minimum	SUPPLY VOLTAGE28 – 30 VDC
CONFIGURATIONModule	CATEGORYBroadband Amplifier Module

P1dB: 12 W typical / 20 W typical. Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.

DETAILED SPECIFICATION GROUPS

HD30174 electrical specifications

Source: HD30174 V2.4.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

Parameter	Specification	Conditions / notes
Operating Frequency Range	1.0 – 6.0 GHz
Power Output @ Psat	20 W minimum / >30 W typical	CW
Output Power @ P1 dB	12 W typical / 20 W typical	CW
Power Gain	43 dB minimum	0 dBm or less for rated Pout
Power Gain Flatness	3.0 dB p-p maximum	Constant input power
Input Return Loss	-10 dB maximum	Relative to 50 Ohm
2-Tone Intermodulation (IMD)	-30 dBc typical	33 dBm/Tone, A = 1 MHz
Operating Voltage	28 – 30 VDC
Current Consumption	6 A maximum	At rated Pout

CONTROL & MONITORING

HD30174 control and monitoring

Parameter	Specification	Conditions / notes
RF Connectors In/Out	SMA female
DC Power / Interface Connector	9-Pin D-Sub

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

Parameter	Specification	Conditions / notes
Operating Case Temperature	-20 to +75 °C
Storage Temperature	-40 to +85 °C
Relative Humidity	up to 95%	Non-condensing
Altitude	3000 meters

PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

Parameter	Specification	Conditions / notes
Dimensions	188 × 91.4 × 27 mm	Excluding connectors
RF Connectors In/Out	SMA female
DC Power / Interface Connector	9-Pin D-Sub
Cooling	External heatsink	Forced air required

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD30174 documentation

Download HD30174 V2.4.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD30174

What frequency range does HD30174 cover?

HD30174 is listed for 1,000–6,000 MHz operation.

What output power and gain are specified?

Output: 20 W minimum / >30 W typical Psat. Gain: 43 dB minimum. P1dB: 12 W typical / 20 W typical. Preserve the rating definitions and conditions in the complete datasheet.

What power supply and cooling does HD30174 require?

Supply: 28 – 30 VDC. Cooling: External heatsink.

Which control and monitoring interfaces are available?

Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.

What are the mechanical specifications?

Dimensions: 188 × 91.4 × 27 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

What do the protection ratings cover?

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

Where can I get the HD30174 datasheet?

Download the matching HD30174 datasheet.

REQUEST A QUOTE