HD33618 RF Amplifier
Module
HD33618
| FREQUENCY RANGE6,000–18,000 MHz | OUTPUT POWER50 W minimum Psat |
| GAIN47 dB minimum | SUPPLY VOLTAGE28 V (catalog) |
| CONFIGURATIONModule | CATEGORYUltra High Frequency amplifier Module |
HD33618 electrical specifications
Source: HD33618 V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 6.0 – 18.0 GHz | |
| Power Output Psat | 50 W minimum | 40 W over Temp range |
| Power Gain | 47 dB minimum | 0 dBm typical for Nom Pout |
| Power Gain Flatness | +3.0 dB maximum | |
| Input / Output VSWR | 2:1/3:1Max | |
| Harmonics | -12 dBc maximum | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Noise Floor @ On / Off | -90 dBm/Hz / -170 dBm/Hz maximum | |
| Noise Figure | 10 dB maximum | |
| Power Dissipation | 500 W maximum | Efficiency >10 % |
HD33618 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | Summary Fault | Summary Fault |
| 2 | Status Pin | Status Pin |
| Al | VDD | 28 VDC |
| A2 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +50 °C | |
| Storage Temperature | -40 to +75 °C | |
| Relative Humidity | 5 to 95% | Non-condensing |
| Vibration | MIL-STD-810F Method 514.3 |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 180 × 95 × 35 mm | Excluding connectors |
| RF Connectors In/Out | SMA female | |
| DC Power / Interface Connector | 7-Pin Hybrid D-Sub | |
| Cooling | Liquid cooling only | Air cooling not allowed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD33618 documentation
Download HD33618 V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD33618
HD33618 is listed for 6,000–18,000 MHz operation.
Output: 50 W minimum Psat. Gain: 47 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 28 V (catalog). Cooling: Liquid cooling only.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 180 × 95 × 35 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.