ULTRA HIGH FREQUENCY AMPLIFIER MODULE

HD31152 RF Amplifier
Module

6,000–18,000 MHz · 5 W (catalog) output · 37 dB minimum gain
HD31152 RF amplifier module product photo
MODULE

HD31152

HD31152 is an RF amplifier module covering 6,000–18,000 MHz, listed in the Ultra High Frequency amplifier Module product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE6,000–18,000 MHzOUTPUT POWER5 W (catalog)
GAIN37 dB minimumSUPPLY VOLTAGE12 VDC Nom
CONFIGURATIONModuleCATEGORYUltra High Frequency amplifier Module
Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD31152 electrical specifications

Source: HD31152 V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating Frequency Range6.0 – 18.0 GHz
Power Output5 W minimumCW
Power Gain37 dB minimum
Power Gain Flatness4.0 dB p-p maximumConstant input power
Input / Output Return Loss10 dB minimumRelative to 50 Ohm
2-Tone Intermodulation (IMD)-30 dBc typical27 dBm/Tone, A = 1 MHz
Harmonics-15 dBc typicalAt rated Pout
Spurious-60 dBc maximumNon-harmonics
Noise Figure10 dB maximum
Operating Voltage12 VDC Nom
Current Consumption7.0 A maximumAt rated Pout
CONTROL & MONITORING

HD31152 control and monitoring

PinFunctionDescription
1FWDReserved
2VVAReserved
3CURRENT SENSORReserved

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Operating Case Temperature-20 to +65 °C
Storage Temperature-40 to +85 °C
Relative Humidity5 to 95%Non-condensation
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions80 × 80 × 27 mmExcluding connectors
RF Connectors In/OutSMA female
DC Power / Interface Connector9-Pin D-Sub
CoolingExternal heatsinkForced air required

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD31152 documentation

Download HD31152 V1.2.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD31152

HD31152 is listed for 6,000–18,000 MHz operation.

Output: 5 W (catalog). Gain: 37 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 12 VDC Nom. Cooling: External heatsink.

See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.

Dimensions: 80 × 80 × 27 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD31152

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy