LOW FREQUENCY MODULE

HD31244 RF Amplifier
Module

500–2,500 MHz · 200 W minimum Psat output · 53 dB minimum gain
HD31244 RF amplifier module product photo
MODULE

HD31244

HD31244 is an RF amplifier module covering 500–2,500 MHz, listed in the Low Frequency Module product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE500–2,500 MHzOUTPUT POWER200 W minimum Psat
GAIN53 dB minimumSUPPLY VOLTAGE32 VDC Nom
CONFIGURATIONModuleCATEGORYLow Frequency Module
Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD31244 electrical specifications

Source: HD31244 V2.0.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating Frequency Range500 – 2500 MHz
Power Output @ Psat200 W minimumCW
Power Gain53 dB minimum0 dBm or less for rated Pout
Power Gain Flatness3.0 dB p-p maximumConstant input power
Input / Output Return Loss-10 dB maximum
2-Tone Intermodulation (IMD)-30 dBc typical43 dBm/Tone, A = 1 MHz
Spurious-60 dBc maximumNon-harmonics
Operating Voltage32 VDC Nom
Current Consumption24 A maximumAt rated Pout
Turn On / Off Speed5 uSec maximumOptional
CONTROL & MONITORING

HD31244 control and monitoring

PinFunctionDescription
1Not Usedn/c
2Not Usedn/c
AlVDD32 VDC
A2GNDGround

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Operating Case Temperature-20 to +75 °C
Storage Temperature-40 to +85 °C
Relative Humidityup to 95 %Non-condensing
Altitude3000 meters
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions220 × 156 × 27 mmExcluding connectors
RF Connectors In/OutSMA female / Type N female
DC Power / Interface Connector7W2 – 7-Pin Hybrid D-Sub
CoolingExternal heatsinkForced air required

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD31244 documentation

Download HD31244 V2.0.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD31244

HD31244 is listed for 500–2,500 MHz operation.

Output: 200 W minimum Psat. Gain: 53 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 32 VDC Nom. Cooling: External heatsink.

See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.

Dimensions: 220 × 156 × 27 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD31244

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy