HD30357 RF Amplifier
Module
HD30357
| FREQUENCY RANGE20–1,000 MHz | OUTPUT POWER100 W minimum / >120 W typical Psat |
| GAIN50 dB minimum | SUPPLY VOLTAGE28–32 V (catalog) |
| CONFIGURATIONModule | CATEGORYLow Frequency Module |
HD30357 electrical specifications
Source: HD30357 V2.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 20 – 1000 MHz | |
| Power Output @ Psat | 100 W minimum / >120 W typical | CW |
| Power Gain | 50 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -20 dBc typical | 40 dBm/Tone, A = 1 MHz |
| Spurious | -60 dBc maximum | Non-harmonics |
| Current Consumption | 14 A maximum | At rated Pout |
| Turn On / Off Speed | 7 uSec maximum | Optional |
HD30357 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | FWD | Option-101 (With larger housing dimensions) |
| 2 | VVA | Option-103 |
| 5 | SHUTDOWN | Enable = TTL High or Open; Disable = TTL Low or Short |
| 6,7 | VDD | 32 VDC |
| 8,9 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +65 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95% | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 162 × 100 × 30 mm | Excluding connectors |
| RF Connectors In/Out | SMA female | |
| DC Power / Interface Connector | 9-Pin D-Sub | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD30357 documentation
Download HD30357 V2.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD30357
HD30357 is listed for 20–1,000 MHz operation.
Output: 100 W minimum / >120 W typical Psat. Gain: 50 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 28–32 V (catalog). Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 162 × 100 × 30 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.