HD30420 RF Amplifier
System
HD30420
| FREQUENCY RANGE4,000–8,000 MHz | OUTPUT POWER20 W minimum / 25 W typical Psat |
| GAIN43 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYBroadband Amplifier System |
HD30420 electrical specifications
Source: HD30420 (4 – 8GHz, 20W, 43dB) V0.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 4.0 – 8.0 GHz | |
| Power Output @ Psat | 20 W minimum / 25 W typical | CW or Pulse |
| Power Output @ P1 dB | 10 W typical | |
| Power Gain | 43 dB minimum | 0 dBm or less for rated Pout |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 33 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47 – 63Hz |
| Power Consumption | 500 W maximum | At rated output |
HD30420 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent (rear panel) |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50°C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x Hx D | 482 × 133 × 560 mm | 3U, excluding handles |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent (rear panel) |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD30420 documentation
Download HD30420 (4 – 8GHz, 20W, 43dB) V0.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD30420
HD30420 is listed for 4,000–8,000 MHz operation.
Output: 20 W minimum / 25 W typical Psat. Gain: 43 dB minimum. P1dB: 10 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 482 × 133 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.