HD30829 RF Amplifier
System
HD30829
| FREQUENCY RANGE100–500 MHz | OUTPUT POWER1000 W minimum Psat |
| GAIN60 dB minimum | SUPPLY VOLTAGE180 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD30829 electrical specifications
Source: HD30829 (0.1 – 1GHz, 1000W, 60dB) V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 100 – 500 MHz | |
| Power Output @ Psat (CW) | 1000 W minimum | <0 dBm for rated Pout |
| Power Gain | 60 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 50 dBm/Tone, A = 1 MHz |
| Harmonics | -15 dBc typical | At rated output |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 180 – 240 VAC | 50 – 60 Hz |
| Power Consumption | 5 kW maximum | At rated output |
HD30829 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N / DIN Female | Front or rear panel |
| \/O Connector | 9-Pin D-Sub |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5to 95% | Non Condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 308 × 600 mm | 7U, excluding handles |
| RF Connectors In/Out | Type-N / DIN Female | Front or rear panel |
| AC Power | MS Type | Or equivalent |
| \/O Connector | 9-Pin D-Sub | |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD30829 documentation
Download HD30829 (0.1 – 1GHz, 1000W, 60dB) V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD30829
HD30829 is listed for 100–500 MHz operation.
Output: 1000 W minimum Psat. Gain: 60 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 308 × 600 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.