HD30976 RF Amplifier
Module
HD30976
| FREQUENCY RANGE1,200–1,400 MHz | OUTPUT POWER500 W (catalog) |
| GAIN57 dB minimum | SUPPLY VOLTAGE40 – 42 VDC Nom |
| CONFIGURATIONModule | CATEGORYLow Frequency Module |
HD30976 electrical specifications
Source: HD30976 V3.6.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1.2 – 1.4 GHz | |
| Power Output @ Pulse | 500 W minimum | Peak Pulse |
| Power Gain | 57 dB minimum | Pin = 0 dBm for rated Pout |
| Input Return Loss | -12 dB maximum | |
| Harmonics | -30 dBc maximum | At rated Pout |
| Operating Voltage | 40 – 42 VDC Nom |
HD30976 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | GND | Ground |
| 4 | VDD | +40 – 42 VDC |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 200 × 105 × 30 mm | Excluding connectors |
| RF Connectors In/Out | SMA Female / Type N Female | |
| DC Power / Interface Connector | Feed Thru |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD30976 documentation
Download HD30976 V3.6.pdf for the complete specifications, test conditions, drawings and available options.
About HD30976
HD30976 is listed for 1,200–1,400 MHz operation.
Output: 500 W (catalog). Gain: 57 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 40 – 42 VDC Nom. Confirm cooling and installation requirements in the datasheet.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 200 × 105 × 30 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.