HD31005 RF Amplifier
System
HD31005
| FREQUENCY RANGE3,300–4,900 MHz | OUTPUT POWER300 W minimum Psat |
| GAIN55 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD31005 electrical specifications
Source: HD31005 (3.3 – 4.9GHz, 300W, 55dB) V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 3.3 – 4.9 GHz | |
| Power Output @ Psat | 300 W minimum | CW |
| Power Gain | 55 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 44 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Non-Harmonics Spurious | -60 dBc maximum | Non-harmonic |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 1800 W maximum | At rated output |
HD31005 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 133 × 560 mm | 3U, excluding handles |
| RF Connectors In/Out | Type-N Female | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | IEC 60320-C14 | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31005 documentation
Download HD31005 (3.3 – 4.9GHz, 300W, 55dB) V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD31005
HD31005 is listed for 3,300–4,900 MHz operation.
Output: 300 W minimum Psat. Gain: 55 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 133 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.