HD31014 RF Amplifier
System
HD31014
| FREQUENCY RANGE18,000–26,500 MHz | OUTPUT POWER4 W minimum / >5 W typical Psat |
| GAIN37 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYMillimeter Amplifier System |
HD31014 electrical specifications
Source: HD31014 (18 – 26.5GHz, 4W, 37dB) V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 18 – 26.5 GHz | |
| Power Output @ Psat | 4 W minimum / >5 W typical | CW |
| Power Gain | 37 dB minimum | |
| Power Gain Flatness | 5.0 dB p-p maximum | At rated Pout |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 26 dBm/Tone, A = 1 MHz |
| Harmonics | <-25 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Noise Figure | 10 dB maximum | |
| Operating Voltage | 100 – 240 VAC | 50/60Hz |
| Power Consumption | 100 W maximum | At rated Pout |
HD31014 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | SMA Female | Front Panel Standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5to 95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 210 × 100 × 300 mm | Excluding brackets |
| Dimensions W x H x D (Benchtop) | 242 × 110 × 384 mm | Including brackets |
| RF Connectors In/Out | SMA Female | Front Panel Standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | |
| Cooling | Built-in fan cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31014 documentation
Download HD31014 (18 – 26.5GHz, 4W, 37dB) V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD31014
HD31014 is listed for 18,000–26,500 MHz operation.
Output: 4 W minimum / >5 W typical Psat. Gain: 37 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 210 × 100 × 300 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.