MILLIMETER AMPLIFIER SYSTEM

HD31017 RF Amplifier
System

30,000–40,000 MHz · 5 W minimum Psat output · 37 dB minimum gain
HD31017 RF amplifier system product photo
SYSTEM

HD31017

HD31017 is an RF amplifier system covering 30,000–40,000 MHz, listed in the Millimeter Amplifier System product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE30,000–40,000 MHzOUTPUT POWER5 W minimum Psat
GAIN37 dB minimumSUPPLY VOLTAGE100 – 240 VAC
CONFIGURATIONSystemCATEGORYMillimeter Amplifier System
Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD31017 electrical specifications

Source: HD31017 (30 – 40GHz, 5W, 37dB) V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating Frequency Range30.0 – 40.0 GHz
Power Output @ Psat5 W minimumCW
Power Gain37 dB minimum
Power Gain Flatness6.0 dB p-p maximumAt rated Pout
Input Return Loss-10 dB maximumRelative to 50 Ohm
2-Tone Intermodulation (IMD)-30 dBc typical27 dBm/Tone, A = 1 MHz
Harmonics-25 dBc typicalAt rated Pout
Spurious-60 dBc maximumNon-harmonics
Noise Figure10 dB maximum
Operating Voltage100 – 240 VAC47/63Hz
Power Consumption300 W maximumAt rated Pout
CONTROL & MONITORING

HD31017 control and monitoring

ParameterSpecificationConditions / notes
AC Power / Interface ConnectorIEC 60320-C14 / 9-Pin D-Sub

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Relative Humidity5 to 95%Non-condensing
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions W x H x D210 × 100 × 300 mmExcluding brackets
Dimensions W x H x D (Benchtop)242 × 110 × 384 mmIncluding brackets
AC Power / Interface ConnectorIEC 60320-C14 / 9-Pin D-Sub
CoolingBuilt-in fan cooling

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD31017 documentation

Download HD31017 (30 – 40GHz, 5W, 37dB) V1.1.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD31017

HD31017 is listed for 30,000–40,000 MHz operation.

Output: 5 W minimum Psat. Gain: 37 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.

Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.

Dimensions: 210 × 100 × 300 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD31017

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy