HD31034 RF Amplifier
Module
HD31034
| FREQUENCY RANGE1,200–1,400 MHz | OUTPUT POWER500 W minimum / 600 W typical Psat |
| GAIN57 dB minimum | SUPPLY VOLTAGE32 VDC Nom |
| CONFIGURATIONModule | CATEGORYLow Frequency Module |
HD31034 electrical specifications
Source: HD31034 V1.3.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1200 – 1400 MHz | Option: 850 – 1400 MHz |
| Power Output @ Psat | 500 W minimum / 600 W typical | CW |
| Power Gain | 57 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 2.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 47 dBm/Tone, A = 1 MHz |
| Harmonics | <-30 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 32 VDC Nom | |
| Current Consumption | 52 A maximum | At rated Pout |
HD31034 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | FWD | Option-101 (With larger housing dimensions) |
| 2 | VVA | OPTION 103 |
| 5 | SHUTDOWN | Enable = TTL High or Open; Disable = TTL Low or Short |
| Al,A2 | VDD | 32 VDC |
| A3,A4 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5 to 95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 350 × 250 × 32 mm | Excluding connectors |
| RF Connectors In/Out | SMA female / Type N female | |
| DC Power / Interface Connector | 9-Pin Hybrid D-Sub | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31034 documentation
Download HD31034 V1.3.pdf for the complete specifications, test conditions, drawings and available options.
About HD31034
HD31034 is listed for 1,200–1,400 MHz operation.
Output: 500 W minimum / 600 W typical Psat. Gain: 57 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 32 VDC Nom. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 350 × 250 × 32 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.