HD31125 RF Amplifier
System
HD31125
| FREQUENCY RANGE6,000–18,000 MHz | OUTPUT POWER10 W (catalog) |
| GAIN40 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYUltra High Frequency amplifier System |
HD31125 electrical specifications
Source: HD31125 (6 – 18GHz, 10W, 40dB) V2.5.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 6.0 – 18.0 GHz | |
| Power Output | 10 W minimum | Saturated CW |
| Power Gain | 40 dB minimum | |
| Power Gain Flatness | 4.0 dB p-p maximum | |
| Input Return Loss | 10 dB minimum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 33 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | |
| Power Consumption | 150 W maximum | At rated Pout |
HD31125 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | Front Panel Standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50°C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5 to 95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D Benchtop | 210 × 100 × 300 mm 242 × 110 × 384 mm | Excluding brackets Including brackets |
| RF Connectors In/Out | Type-N Female | Front Panel Standard |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | |
| Cooling | Built-in fan cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31125 documentation
Download HD31125 (6 – 18GHz, 10W, 40dB) V2.5.pdf for the complete specifications, test conditions, drawings and available options.
About HD31125
HD31125 is listed for 6,000–18,000 MHz operation.
Output: 10 W (catalog). Gain: 40 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 210 × 100 × 300 mm 242 × 110 × 384 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.