HD31165 RF Amplifier
System
HD31165
| FREQUENCY RANGE1–1,000 MHz | OUTPUT POWER50 W typical Psat |
| GAIN47 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD31165 electrical specifications
Source: HD31165 (1 – 1000MHz, 50W, 47dB) V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1- 1000 MHz | |
| Power Output @ Psat | 50 W typical | CW or Pulse |
| Power Gain | 47 dB minimum | 0 dBm or less for Rated Power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Power Gain Flatness | 4 dB p-p maximum | Constant input power |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 37 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output |
| Operating Voltage | 100 – 240 VAC | 47 – 63 Hz |
| Power Consumption | 600 W maximum | At rated output |
HD31165 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent (rear panel) |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x Hx D | 482 × 133 × 560 mm | 3U, excluding handles |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent (rear panel) |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31165 documentation
Download HD31165 (1 – 1000MHz, 50W, 47dB) V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD31165
HD31165 is listed for 1–1,000 MHz operation.
Output: 50 W typical Psat. Gain: 47 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 482 × 133 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.