HD31202 RF Amplifier
System
HD31202
| FREQUENCY RANGE800–2,500 MHz | OUTPUT POWER1000 W minimum Psat |
| GAIN60 dB minimum | SUPPLY VOLTAGE180 – 240 VAC, 3-Phase |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD31202 electrical specifications
Source: HD31202(0.8 – 2.5GHz, 1000W, 60dB) V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 0.8 – 2.5 GHz | |
| Power Output @ Psat (CW) | 1000 W minimum | CW or Pulse |
| Power Output @ P1 dB | 300 W typical | |
| Power Gain | 60 dB minimum | 0 dBm or less for rated Pout |
| Gain Adjustment Range | 20 dB minimum | Local or remote |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 50 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 180 – 240 VAC, 3-Phase | 47-63 Hz |
| Power Consumption | 6.5 kW maximum | At rated Pout |
HD31202 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95% | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 353 × 800 mm | 8U, Rack Mount Chassis |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | MS3102E22-22P | Or equivalent |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31202 documentation
Download HD31202(0.8 – 2.5GHz, 1000W, 60dB) V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD31202
HD31202 is listed for 800–2,500 MHz operation.
Output: 1000 W minimum Psat. Gain: 60 dB minimum. P1dB: 300 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180 – 240 VAC, 3-Phase. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 353 × 800 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.