HD31209 RF Amplifier
System
HD31209
| FREQUENCY RANGE1,000–6,000 MHz | OUTPUT POWER300 W minimum Psat |
| GAIN55 dB minimum | SUPPLY VOLTAGE-50 dB |
| CONFIGURATIONSystem | CATEGORYBroadband Amplifier System |
HD31209 electrical specifications
Source: HD31209(1 – 6GHz, 300W, 55dB) V1.8.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1.0 – 6.0 GHz | |
| Power Output @ Psat | 300 W minimum | CW & Pulse |
| Power Output @ P1 dB | 200 W minimum | |
| Power Gain | 55 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 43 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output |
| Spurious | -60 dBc maximum | Non-harmonic |
| Power Consumption | 180 – 240 VAC | 50 – 60Hz |
| Operating Voltage | -50 dB | SMA or N-Female |
HD31209 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 222 × 750 mm | 5U, excluding handles |
| RF Conn. In / Out / Sample | Type-N Female | Front or rear panel |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31209 documentation
Download HD31209(1 – 6GHz, 300W, 55dB) V1.8.pdf for the complete specifications, test conditions, drawings and available options.
About HD31209
HD31209 is listed for 1,000–6,000 MHz operation.
Output: 300 W minimum Psat. Gain: 55 dB minimum. P1dB: 200 W minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: -50 dB. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 222 × 750 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.