HD31939 RF Amplifier
Module
HD31939
| FREQUENCY RANGE26,500–40,000 MHz | OUTPUT POWER30dBmP1 (catalog) |
| GAIN36 dB minimum | SUPPLY VOLTAGE8 V (catalog) |
| CONFIGURATIONModule | CATEGORYMillimeter Amplifier Module |
HD31939 electrical specifications
Source: HD31939 V1.4.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 26.5 – 40 GHz | |
| Output Power @ P1 dB | 30 dBm minimum | |
| Linear Gain | 36 dB minimum | |
| Gain Flatness | +2.2 dB typical / +3.5 dB maximum | |
| Noise Figure | 6 dB typical | |
| DC Bias Voltage | 8 VDC Nom / 4.6 A maximum |
HD31939 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | 2.92 mm K-Female |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +60 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | 2.92 mm K-Female |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31939 documentation
Download HD31939 V1.4.pdf for the complete specifications, test conditions, drawings and available options.
About HD31939
HD31939 is listed for 26,500–40,000 MHz operation.
Output: 30dBmP1 (catalog). Gain: 36 dB minimum. P1dB: 30 dBm minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 8 V (catalog). Confirm cooling and installation requirements in the datasheet.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.