HD31992 RF Amplifier
System
HD31992
| FREQUENCY RANGE1–6,000 MHz | OUTPUT POWER30 W minimum / 50 W typical Psat |
| GAIN45 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYBroadband Amplifier System |
HD31992 electrical specifications
Source: HD31992 (1 – 6GHz, 30W, 45dB) V2.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Band | A | B | Band switching @ 15 mS maximum |
| Operating Frequency Range | 1- 1000 MHz | 1- 6 GHz | |
| Power Output @ Psat | 30 W minimum / 50 W typical | CW or Pulse |
| Power Gain | 45 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 35 dBm/Tone, A = 1 MHz |
| Harmonics | <-20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 500 W maximum | At rated output |
HD31992 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D (without DMC) | 430 × 88 × 560 mm | 2U, excluding handles |
| Dimensions W x H x D (Including DMC) | 430 × 133 × 560 mm | 3U, excluding handles |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD31992 documentation
Download HD31992 (1 – 6GHz, 30W, 45dB) V2.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD31992
HD31992 is listed for 1–6,000 MHz operation.
Output: 30 W minimum / 50 W typical Psat. Gain: 45 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 88 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.