HD32015 RF Amplifier
System
HD32015
| FREQUENCY RANGE500–1,300 MHz | OUTPUT POWER1000 W minimum Psat |
| GAIN60 dB minimum | SUPPLY VOLTAGE180 – 264 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD32015 electrical specifications
Source: HD32015 (0.5 – 1.3GHz, 1000W, 60dB) V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
Frequency clarification: This page follows the matching PDF (500–1,300 MHz). The product matrix lists 500–1,200 MHz. Confirm the required frequency range when requesting a quote.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 500 – 1300 MHz | |
| Power Output @ Psat | 1000 W minimum | CW or Pulse |
| Power Gain | 60 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 50 dBm/Tone, A = 1 MHz |
| Harmonics | -15 dBc maximum | At rated Pout |
| Operating Voltage | 180 – 264 VAC | 50 – 60Hz |
| Power Consumption | 4500 W maximum | At rated Pout |
HD32015 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 220 × 635 mm | 5U, excluding handles |
| AC Power | MS | Or equivalent |
| Interface Connector | 9-Pin D-Sub | |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32015 documentation
Download HD32015 (0.5 – 1.3GHz, 1000W, 60dB) V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD32015
HD32015 is listed for 500–1,300 MHz operation.
Output: 1000 W minimum Psat. Gain: 60 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180 – 264 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 220 × 635 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.