HD32102 RF Amplifier
System
HD32102
| FREQUENCY RANGE18,000–26,500 MHz | OUTPUT POWER>12 W typical Psat |
| GAIN40 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYMillimeter Amplifier System |
HD32102 electrical specifications
Source: HD32102 (18 – 26.5GHz, 12W, 40dB) V1.4.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 18.0 – 26.5 GHz | |
| Power Output @ Psat | >12 W typical | CW or Pulse |
| Power Output @ P1 dB | 10 W typical | |
| Power Gain | 40 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 30 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47/63 Hz |
| Power Consumption | 400 W maximum | At rated output |
HD32102 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out/Sample | 2.9 mm KF/ WR42/ 2.9 mm KF | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 430 × 133 × 560 mm | 3U, excluding handles |
| RF Connectors In/Out/Sample | 2.9 mm KF/ WR42/ 2.9 mm KF | Front or rear panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32102 documentation
Download HD32102 (18 – 26.5GHz, 12W, 40dB) V1.4.pdf for the complete specifications, test conditions, drawings and available options.
About HD32102
HD32102 is listed for 18,000–26,500 MHz operation.
Output: >12 W typical Psat. Gain: 40 dB minimum. P1dB: 10 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 133 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.