HD32141 RF Amplifier
System
HD32141
| FREQUENCY RANGE9,600–9,900 MHz | OUTPUT POWER1,000 W (catalog) |
| GAIN60 dB minimum | SUPPLY VOLTAGE100 – 240 VAC, 50 – 60Hz |
| CONFIGURATIONSystem | CATEGORYUltra High Frequency amplifier System |
HD32141 electrical specifications
Source: HD32141 (9.6 – 9.9GHz, 1000W, 60dB) V0.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency | 9.6 – 9.9 GHz | |
| Power Output @ Peak Pulse | 1000 W minimum | |
| Power Gain | 60 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 2.0 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input Return Loss | -10 dB maximum | |
| Output Power On/Off Ratio | -80 dB maximum | TTL Gate Control |
| Spurious | -60 dBc maximum | Non-harmonic |
| Harmonics | -30 dBc typical | At rated output power |
| Operating Voltage | 100 – 240 VAC, 50 – 60Hz | |
| Power Consumption | 1200 W Avg. maximum | @ 10% Duty cycle |
HD32141 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95% | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x Hx D | 482 × 219 × 700 mm | 5U, excluding handles |
| Gate Control | BNC Female | Rear panel std. (Front avail.) |
| AC Power / Interface Connector | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32141 documentation
Download HD32141 (9.6 – 9.9GHz, 1000W, 60dB) V0.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD32141
HD32141 is listed for 9,600–9,900 MHz operation.
Output: 1,000 W (catalog). Gain: 60 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC, 50 – 60Hz. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 482 × 219 × 700 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.