HD32822 RF Amplifier
System
HD32822
| FREQUENCY RANGE0.01–250 MHz | OUTPUT POWER500 W minimum / 700 W typical Psat |
| GAIN57 dB minimum | SUPPLY VOLTAGE180 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD32822 electrical specifications
Source: HD32822 (0.01 – 250MHz, 500W, 57dB) V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 10 kHz – 250 MHz | CW |
| Power Output @ Psat | 500 W minimum / 700 W typical | |
| Power Output @ P1 dB | 300 W minimum / 400 W typical | |
| Power Gain | 57 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 3 dB p-p maximum | Constant input power |
| Gain Adjustment Range | >20 dB typical | Local or remote capable |
| Input / Return Loss | -10 dB maximum | |
| Harmonics | -20 dBc typical | At rated output power |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 180 – 240 VAC | 50 – 60Hz |
| Power Consumption | 3000 W maximum | At rated output |
HD32822 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 421 × 353 × 600 mm | 8U, excluding handles |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | MS Connector | Or equivalent |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32822 documentation
Download HD32822 (0.01 – 250MHz, 500W, 57dB) V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD32822
HD32822 is listed for 0.01–250 MHz operation.
Output: 500 W minimum / 700 W typical Psat. Gain: 57 dB minimum. P1dB: 300 W minimum / 400 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 180 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 353 × 600 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.