HD32830 RF Amplifier
Module
HD32830
| FREQUENCY RANGE200–20,000 MHz | OUTPUT POWER2 W minimum Psat |
| GAIN33 dB minimum | SUPPLY VOLTAGE15 VDC +0.2V |
| CONFIGURATIONModule | CATEGORYUltra High Frequency amplifier Module |
HD32830 electrical specifications
Source: HD32830 V1.0.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 0.2 – 20.0 GHz | |
| Power Output Psat | 2 W minimum | CW |
| Power Output P1 dB GCP | 1.0 W typical | CW |
| Small Signal Gain | 33 dB minimum | |
| Power Gain Flatness | 5 dB p-p maximum | |
| Input Return Loss | -10 dB maximum | |
| Harmonics | -20 dBc typical | At rated Pout |
| Noise Figure * | 6 dB maximum | |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 15 VDC +0.2V | |
| Current Consumption | 1.9 A maximum | At rated Pout |
HD32830 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | DC Voltage | +15 VDC |
| 2 | GND | GND |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +70°C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5to 95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Hi-Freq. SMA female | |
| DC Power / Interface Connector | Feed Thru | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32830 documentation
Download HD32830 V1.0.pdf for the complete specifications, test conditions, drawings and available options.
About HD32830
HD32830 is listed for 200–20,000 MHz operation.
Output: 2 W minimum Psat. Gain: 33 dB minimum. P1dB: 1.0 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 15 VDC +0.2V. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.