HD32867 RF Amplifier
System
Product photograph pending confirmation.
HD32867
| FREQUENCY RANGE0.01–250 MHz | OUTPUT POWER1250 W minimum / 1500 W typical Psat |
| GAIN62 dB minimum | SUPPLY VOLTAGE120/208, 3-Ph, 47 – 63 Hz |
| CONFIGURATIONSystem | CATEGORYLow Frequency Amplifier System |
HD32867 electrical specifications
Source: HD32867 (0.01 – 250MHz, 1250W, 62dB) V0.6.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 10 kHz – 250 MHz | |
| Power Output @ Psat | 1250 W minimum / 1500 W typical | CW |
| Power Output @ P1 dB | 700 W typical | |
| Power Gain | 62 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 52 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 120/208, 3-Ph, 47 – 63 Hz | Opt: 230/400 VAC, 3-Ph |
| Power Consumption | 5000 W maximum | At rated output |
HD32867 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out/Sample | N-Female/716-Female/N-Female | Front or Rear Panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D | 600 × 960 × 1150 mm | 18U cabinet |
| RF Connectors In/Out/Sample | N-Female/716-Female/N-Female | Front or Rear Panel |
| Interface Connector | 9-Pin D-Sub | Rear panel |
| AC Power | MS Connector | Or equivalent (IEC Connector) |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32867 documentation
Download HD32867 (0.01 – 250MHz, 1250W, 62dB) V0.6.pdf for the complete specifications, test conditions, drawings and available options.
About HD32867
HD32867 is listed for 0.01–250 MHz operation.
Output: 1250 W minimum / 1500 W typical Psat. Gain: 62 dB minimum. P1dB: 700 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 120/208, 3-Ph, 47 – 63 Hz. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 600 × 960 × 1150 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.