HD32869 RF Amplifier
Module
HD32869
| FREQUENCY RANGE170–500 MHz | OUTPUT POWER500 PULSE (catalog) |
| GAIN57 dB minimum | SUPPLY VOLTAGE28 – 30 VDC |
| CONFIGURATIONModule | CATEGORYPulse Amplifier Module |
HD32869 electrical specifications
Source: HD32869 V0.4.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 170 – 500 MHz | |
| Power Output @ Pulse | 500 W minimum | Peak pulse |
| Power Gain | 57 dB minimum | |
| Power Gain Flatness | 3.0 dB p-p maximum | Constant input power |
| Input / Output Return Loss | -10 dB maximum | Relative to 50 Ohm |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 28 – 30 VDC | |
| Turn On / Off Speed | 5 uSec maximum |
HD32869 control and monitoring
| Pin | Function | Description |
|---|---|---|
| Pl | N/c | N/c |
| P2 | N/c | N/c |
| Al | VDD | +28 VDC |
| A2 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5to 95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 240 × 170 × 40 mm | Excluding connectors |
| RF Connectors In/Out | SMA female / Type-N Female | |
| DC Power / Interface Connector | 7-Pin Hybrid D-Sub | 7W2 |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32869 documentation
Download HD32869 V0.4.pdf for the complete specifications, test conditions, drawings and available options.
About HD32869
HD32869 is listed for 170–500 MHz operation.
Output: 500 PULSE (catalog). Gain: 57 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 28 – 30 VDC. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 240 × 170 × 40 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.