HD32870 RF Amplifier
Module
HD32870
| FREQUENCY RANGE1–32 MHz | OUTPUT POWER200 W minimum Psat |
| GAIN53 dB minimum | SUPPLY VOLTAGE35 VDC Nom |
| CONFIGURATIONModule | CATEGORYLow Frequency Module |
HD32870 electrical specifications
Source: HD32870 V1.5.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1 – 32 MHz minimum | |
| Power Output @ Psat | 200 W minimum | CW |
| Power Gain | 53 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 2.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 43 dBm/Tone, A = 1 MHz |
| Harmonics 2nd | <-20 dBc typical | At rated Pout |
| Harmonics 3rd | <-12 dBc typical | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 35 VDC Nom | |
| Current Consumption | 13 A maximum | At rated Pout |
| Turn On / Off Speed | 8 Sec typical | Optional |
HD32870 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | SMA female / Type-N female | |
| DC Power / Interface Connector | 9-Pin D-Sub |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 200 × 106 × 28 mm | Excluding connectors |
| RF Connectors In/Out | SMA female / Type-N female | |
| DC Power / Interface Connector | 9-Pin D-Sub | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD32870 documentation
Download HD32870 V1.5.pdf for the complete specifications, test conditions, drawings and available options.
About HD32870
HD32870 is listed for 1–32 MHz operation.
Output: 200 W minimum Psat. Gain: 53 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 35 VDC Nom. Cooling: External heatsink.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 200 × 106 × 28 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.