HD33342 RF Amplifier
System
HD33342
| FREQUENCY RANGE500–18,000 MHz | OUTPUT POWER20 W minimum | 10 W minimum Psat |
| GAIN43 dB minimum | SUPPLY VOLTAGE100 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYUltra High Frequency amplifier System |
HD33342 electrical specifications
Source: HD33342(0.5 – 18GHz, 10-20W, 43dB) V2.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Band | Band A | Band B | |
| Operating Frequency Band | 0.5 – 6 GHz | 6 – 18 GHz | Band switching @ 15 mS maximum |
| Power Output @ Psat | 20 W minimum | 10 W minimum | Cw |
| Power Gain | 43 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4.0 dB p-p maximum | 6.0 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 33 | 30 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical! | At rated Pout |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 100 – 240 VAC | 47-63 Hz |
| Power Consumption | 300 W maximum | At rated Pout |
HD33342 control and monitoring
| Parameter | Specification | Conditions / notes |
|---|---|---|
| RF Connectors In/Out | Type-N Female | Front or rear panel |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Ambient Temperature | 0 to +50 °C | |
| Relative Humidity | up to 95% | Non-condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x H x D (No display with DMC) | 430 × 88 × 560 mm | 2u, excluding handles |
| RF Connectors In/Out | Type-N Female | Front or rear panel |
| Cooling | Built-in fan cooling | Variable speed |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD33342 documentation
Download HD33342(0.5 – 18GHz, 10-20W, 43dB) V2.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD33342
HD33342 is listed for 500–18,000 MHz operation.
Output: 20 W minimum | 10 W minimum Psat. Gain: 43 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 100 – 240 VAC. Cooling: Built-in fan cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 430 × 88 × 560 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.