HD33620 RF Amplifier
Module
HD33620
| FREQUENCY RANGE0.1–1,000 MHz | OUTPUT POWER10 W minimum Psat |
| GAIN40 dB minimum | SUPPLY VOLTAGE28 – 30 VDC Nom |
| CONFIGURATIONModule | CATEGORYLow Frequency Module |
HD33620 electrical specifications
Source: HD33620 V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
Frequency clarification: This page follows the matching PDF (0.1–1,000 MHz). The product matrix lists 0.01–1,000 MHz. Confirm the required frequency range when requesting a quote.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 0.1 – 1000 MHz | |
| Power Output @ Psat | 10 W minimum | Pin = 0 dBm for rated Pout |
| Power Gain | 40 dB minimum | |
| Power Gain Flatness | 4 dB p-p maximum | Constant input power |
| Input Return Loss | -10 dB maximum | Relative to 50 Ohm |
| 2-Tone Intermodulation (IMD) | <-30 dBc typical | 30 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical! | At rated Pout |
| Spurious | -60dBc maximum | Non-harmonics |
| Operating Voltage | 28 – 30 VDC Nom | |
| Current Consumption | 2 A typical | At rated Pout |
HD33620 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | n/c | n/c |
| 2 | VVA | Option-103 (With larger housing dimensions) |
| 5 | SHUTDOWN | Enable = TTL High or Open; Disable = TTL Low or Short |
| 6,7 | VDD | 30 VDC |
| 8,9 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | 5 to 95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 125 × 63 × 27 mm | Excluding connectors |
| RF Connectors In/Out | SMA female | |
| DC Power / Interface Connector | 9-Pin D-Sub | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD33620 documentation
Download HD33620 V1.1.pdf for the complete specifications, test conditions, drawings and available options.
About HD33620
HD33620 is listed for 0.1–1,000 MHz operation.
Output: 10 W minimum Psat. Gain: 40 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 28 – 30 VDC Nom. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 125 × 63 × 27 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.