LOW FREQUENCY MODULE

HD33631 RF Amplifier
Module

3,100–3,500 MHz · 10 W minimum Psat output · 40 dB minimum gain
HD33631 RF amplifier module product photo
MODULE

HD33631

HD33631 is an RF amplifier module covering 3,100–3,500 MHz, listed in the Low Frequency Module product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE3,100–3,500 MHzOUTPUT POWER10 W minimum Psat
GAIN40 dB minimumSUPPLY VOLTAGE28 VDC Nom
CONFIGURATIONModuleCATEGORYLow Frequency Module
P1dB: 6 W typical. Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD33631 electrical specifications

Source: HD33631 V1.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating Frequency Range3.1- 3.5 GHz
Power Output @ Psat10 W minimumCW
Power Output @ P1 dB6 W typicalCW
Power Gain40 dB minimum0 dBm or less for rated Pout
Power Gain Flatness2.0 dB p-p maximumConstant input power
Input Return Loss-12 dB minimum
2-Tone Intermodulation (IMD)-30 dBc typical30 dBm/Tone, A = 1 MHz
Harmonics-20 dBc maximumAt rated Pout
Noise Figure8 dB maximum
Operating Voltage28 VDC Nom
Current Consumption2.0 A maximumAt rated Pout
CONTROL & MONITORING

HD33631 control and monitoring

ParameterSpecificationConditions / notes
RF Connectors In/OutSMA female
DC Power / Interface Connector9-Pin D-Sub

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Operating Case Temperature-20 to +75 °C
Relative Humidityup to 95%Non-condensing
Altitude3000 meters
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
Dimensions125 × 63 × 27 mmExcluding connectors
RF Connectors In/OutSMA female
DC Power / Interface Connector9-Pin D-Sub
CoolingExternal heatsinkForced air required

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD33631 documentation

Download HD33631 V1.1.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD33631

HD33631 is listed for 3,100–3,500 MHz operation.

Output: 10 W minimum Psat. Gain: 40 dB minimum. P1dB: 6 W typical. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 28 VDC Nom. Cooling: External heatsink.

Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.

Dimensions: 125 × 63 × 27 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD33631

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy