HD33636 RF Amplifier
Module
HD33636
| FREQUENCY RANGE960–1,240 MHz | OUTPUT POWER200 W typical Psat |
| GAIN53 dB minimum | SUPPLY VOLTAGE32 VDC Nom |
| CONFIGURATIONModule | CATEGORYLow Frequency Module |
HD33636 electrical specifications
Source: HD33636 V1.2.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 960 – 1240 MHz | |
| Output Power @ Psat | 200 W typical | CW |
| Power Gain | 53 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 1.5 dB p-p maximum | Constant input power |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 43 dBm/Tone A = 1 MHz |
| Harmonics | -40 dBc maximum | At rated Pout |
| Operating Voltage | 32 VDC Nom | |
| Current Consumption | 17 A maximum | At rated Pout |
| Turn On / Off Speed | 2 uS maximum | Optional |
HD33636 control and monitoring
| Pin | Function | Description |
|---|---|---|
| 1 | FWD | Option-101 (With larger housing dimensions) |
| 2 | REV | Option-102 (With larger housing dimensions) |
| 4 | TEMP SENSOR | Vr @ 10mv/°c + 500mv typical |
| 5 | SHUTDOWN | Enable = TTL High or Open; Disable = TTL Low or Short |
| Al | VDD | 32 VDC |
| A2 | GND | Ground |
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Case Temperature | -20 to +75 °C | |
| Storage Temperature | -20 to +85 °C | |
| Relative Humidity | 5to95% | Non-condensing |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions | 220 × 120 × 28 mm | Excluding connectors |
| RF Connectors In/Out | SMA female / Type-N female | |
| DC Power / Interface Connector | 7-Pin Hybrid D-Sub | |
| Cooling | External heatsink | Forced air required |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD33636 documentation
Download HD33636 V1.2.pdf for the complete specifications, test conditions, drawings and available options.
About HD33636
HD33636 is listed for 960–1,240 MHz operation.
Output: 200 W typical Psat. Gain: 53 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 32 VDC Nom. Cooling: External heatsink.
See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.
Dimensions: 220 × 120 × 28 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.