LOW FREQUENCY MODULE

HD33901 RF Amplifier
Module

1,550–1,600 MHz · 100 W (catalog) output · 50 dB minimum gain
HD33901 RF amplifier module product photo
MODULE

HD33901

HD33901 is an RF amplifier module covering 1,550–1,600 MHz, listed in the Low Frequency Module product group. Compare the output-power rating, gain and supply requirements below with your application, then use the matching datasheet for detailed operating conditions.
FREQUENCY RANGE1,550–1,600 MHzOUTPUT POWER100 W (catalog)
GAIN50 dB minimumSUPPLY VOLTAGE28 – 30 VDC
CONFIGURATIONModuleCATEGORYLow Frequency Module
Values marked “catalog” follow the product matrix. Use the datasheet to confirm rating definitions and operating conditions.
DETAILED SPECIFICATION GROUPS

HD33901 electrical specifications

Source: HD33901 V0.1.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.

ParameterSpecificationConditions / notes
Operating frequency range1575 ±25 MHz
Power Output100 W minimumCW
Power Gain50 dB minimum
Power Gain Flatness<1.0 dB p-p maximumConstant input power
Input / Output VSWR-10 dB maximumRelative to 50 Ohm
2-Tone Intermodulation (IMD)<-30 dBc typical40 dBm/Tone, A = 1 MHz
Harmonics<-20 dBc typicalAt rated Pout
Spurious-60 dBc maximumNon-harmonics
Operating Voltage28 – 30 VDC
Current Consumption10 A maximumAt rated Pout
Module to Module Amplitude+0.5 dB maximum
Module to Module phase+6 Deg maximum
CONTROL & MONITORING

HD33901 control and monitoring

PinFunctionDescription
1FWDn/c
2REVn/c
6,7VDD28 VDC
8,9GNDGround

Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.

ENVIRONMENTAL RATINGS

Operating and storage conditions

ParameterSpecificationConditions / notes
Operating Case Temperature-20 to +75 °C
Storage Temperature-40 to +85 °C
Relative Humidity5 to 95%Non-condensing
PRODUCT SPECIFICATIONS

Mechanical specifications and cooling

ParameterSpecificationConditions / notes
RF Connectors In/OutSMA female
DC Power / Interface Connector9-Pin D-Sub
CoolingExternal heatsinkForced air required

Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.

TECHNICAL RESOURCES

HD33901 documentation

Download HD33901 V0.1.pdf for the complete specifications, test conditions, drawings and available options.

PRODUCT-SPECIFIC FAQS

About HD33901

HD33901 is listed for 1,550–1,600 MHz operation.

Output: 100 W (catalog). Gain: 50 dB minimum. Preserve the rating definitions and conditions in the complete datasheet.

Supply: 28 – 30 VDC. Cooling: External heatsink.

See the model-specific interface table above. Optional functions must be confirmed for the ordered unit.

Review the mechanical table and original outline drawing before planning mounting and connector clearances.

Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.

REQUEST A QUOTE

Request a quote for HD33901

Send your requirements for pricing, availability and an engineering review. The model and category are prefilled below.
Prefer to contact us directly?
sales@hdcom.com
+1 (631) 588-3877

We will use the details you provide to respond to your inquiry. Privacy Policy