HD33940 RF Amplifier
System
HD33940
| FREQUENCY RANGE1,000–6,000 MHz | OUTPUT POWER400 W minimum / 500 W typical Psat |
| GAIN56 dB minimum | SUPPLY VOLTAGE200 – 240 VAC |
| CONFIGURATIONSystem | CATEGORYBroadband Amplifier System |
HD33940 electrical specifications
Source: HD33940 (1 – 6GHz, 400W, 56dB) V0.9.pdf. Refer to the complete datasheet for all test conditions, optional ratings and protection limits.
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Operating Frequency Range | 1.0 – 6.0 GHz | |
| Power Output @ Psat | 400 W minimum / 500 W typical | CW or Pulse |
| Power Output @ P1 dB | 250 W minimum / 300 W typical | |
| Power Gain | 56 dB minimum | 0 dBm or less for rated Pout |
| Power Gain Flatness | 4 dB p-p maximum | Constant input power |
| Gain Adjustment Range | 20 dB minimum | Local or remote capable |
| Input / Output Return Loss | -10 dB maximum | |
| 2-Tone Intermodulation (IMD) | -30 dBc typical | 46 dBm/Tone, A = 1 MHz |
| Harmonics | -20 dBc typical | At rated output |
| Spurious | -60 dBc maximum | Non-harmonics |
| Operating Voltage | 200 – 240 VAC | 50-60 Hz |
| Power Consumption | 4000 W maximum | At rated output |
HD33940 control and monitoring
Use the matching datasheet to confirm available control and monitoring interfaces for the ordered configuration.
Confirm connector orientation and optional functions against the complete model-specific documentation before wiring.
Operating and storage conditions
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Storage Temperature | -40 to +85 °C | |
| Relative Humidity | up to 95 % | Non Condensing |
| Altitude | 3000 meters |
Mechanical specifications and cooling
| Parameter | Specification | Conditions / notes |
|---|---|---|
| Dimensions W x Hx D | 421 × 220 × 750 mm | 6U, excluding handles |
| AC Power | IEC 60320-C14 / 9-Pin D-Sub | Or equivalent |
| Cooling: Built in Quiet-Cool | Closed-circuit air-liquid cooling |
Use the original outline drawing for mounting-hole positions, connector clearances and ordered options.
HD33940 documentation
Download HD33940 (1 – 6GHz, 400W, 56dB) V0.9.pdf for the complete specifications, test conditions, drawings and available options.
About HD33940
HD33940 is listed for 1,000–6,000 MHz operation.
Output: 400 W minimum / 500 W typical Psat. Gain: 56 dB minimum. P1dB: 250 W minimum / 300 W typical. Preserve the rating definitions and conditions in the complete datasheet.
Supply: 200 – 240 VAC. Cooling: Closed-circuit air-liquid cooling.
Review the matching datasheet and confirm the required interface and monitoring options when requesting a quote.
Dimensions: 421 × 220 × 750 mm. Review the mechanical table and original outline drawing before planning mounting and connector clearances.
Protection ratings are subject to the datasheet conditions and time limits. They do not imply unlimited operation under overload or mismatch.